I was looking over the guide over at
http://www.gamesx.com/rgbadd/genesis3.htm (http://www.gamesx.com/rgbadd/genesis3.htm)
it seems pretty easy but i have a few questions....
1.) the mod shows a resistor coming from the chip going to the positive lead on a 22ouf capacitor. what do i do with the negative lead from the capacitors? obviously i do this 2 times one for each pin but i dont understand what i have to do with the negative lead from the cap?
2.) how would i get composite sound out of the genesis 3. The svideo mod will only give me picture so what do i do about audio?
Thanks in advance guys for your help. Im new here so i hope you still help me out....
On the negative leads of the 2 capacitators you got your s-video signal (Y & C). You could install a s-video socket on the back of you Genesis 3 and connect the appropriate pins to the capacitators.
For sound you could use the standard AV cable.