Terminal had been used in the NE2000 clone


 NE2000 clone was purchased for me, the following pins have been used.
 (Blank terminal was not used)
 Each pin of the NE2000 side of the schematic, and some fireworks can I connect to the following 
 terminals.
 After, the power supply from X68000 bus, please do the wiring in the thick wire.

 This figure has been seen from the figure on the ISA bus connector.

		 + ----- +
	     Gnd | [] [] |
	RESETDRV | [] [] | D7
	    +5 V | [] [] | D6
	    IRQ9 | [] [] | D5
		 | [] [] | D4
		 | [] [] | D3
		 | [] [] | D2
		 | [] [] | D1
	   +12 V | [] [] | D0
	     Gnd | [] [] | IOCHRDY
		 | [] [] | AEN
	  -SMEMR | [] [] | A19
	    -IOW | [] [] | A18
	    -IOR | [] [] | A17
		 | [] [] | A16
		 | [] [] | A15
		 | [] [] | A14
		 | [] [] | A13
		 | [] [] | A12
		 | [] [] | A11
		 | [] [] | A10
		 | [] [] | A9
	    IRQ5 | [] [] | A8
	    IRQ4 | [] [] | A7
	    IRQ3 | [] [] | A6
		 | [] [] | A5
		 | [] [] | A4
		 | [] [] | A3
	    +5 V | [] [] | A2
		 | [] [] | A1
	     Gnd | [] [] | A0
		 + ----- +
		 + ----- +
		 | [] [] |
	 -IOCS16 | [] [] |
	   IRQ10 | [] [] |
	   IRQ11 | [] [] |
	   IRQ12 | [] [] |
	   IRQ15 | [] [] |
		 | [] [] |
		 | [] [] |
		 | [] [] |
		 | [] [] |	
		 | [] [] | D8	
		 | [] [] | D9
		 | [] [] | D10
		 | [] [] | D11
		 | [] [] | D12
	    +5 V | [] [] | D13
		 | [] [] | D14	
	     Gnd | [] [] | D15
		 + ----- +