Author Topic: PS2 A/V out to stand VGA adapter (Read 1999 times)

Kotosuke · « **on:** July 04, 2004, 09:44:16 am »

I read all page&forum, but can't know How to make this adapter(converter).
I need to make a [PS2 A/V(RGB) out to stand VGA(15 pin) adapter] for my VGA&PS2.
anyone can tall me? how can find the schematic or PCB? :huh:

I Saw RARusk's Dreamcast VGA box, that's beautiful great works. :lol:

Thanks a lot

Guest · « **Reply #1 on:** July 06, 2004, 05:44:49 am »

No any body know ?

benzaldehyde · « **Reply #2 on:** July 06, 2004, 11:33:21 pm »

You need to wire the RGB lines to the HD15 VGA connections which are outlined in the Hardware Bible on gamesx.com. The problem is you need to separate the sync from the green signal (it's a sync-on-green), and then into H and V sync. This is quite difficult, so it's probably better to get something like the Blaze VGA adapter.

Guest · « **Reply #3 on:** July 07, 2004, 05:31:28 am »

for the sync the LM1881 should do all that work for you. It will strip off the sync from the green line, and then give you H and V sync. It is a very simple circuit and just needs the 5+ line from the AV port. I am going to attempt to build one since the Blaze VGA didn't work so well.

Also, see the forum titled, PS2 Blaze VGA

benzaldehyde · « **Reply #4 on:** July 07, 2004, 12:00:33 pm »

Careful. The LM1881 outputs vertical and composite sync, not horizontal. Most monitors will accept a composite sync input for horizontal sync, but some won't. So, be weary.

fragment · « **Reply #5 on:** July 07, 2004, 05:43:37 pm »

Well I think you stand a better chance than a SOG cable. Even on this pinout, pin 13 is
reffered to as horizontal or composite sync:
http://www.gamesx.com/hwb/co_VGA15.html
___________________________________________________________________________________________

In the Xbox community, this is exactly how they are building their VGA cables, and some PS2
people also have done the same with positive results.

Link to picture

link to article
http://www.xbox-scene.com/articles/vga-cable.php

_________________________________________________________________________________________

Another group posted an article on the PS2 VGA diagram, but they had pin 13 and 14
reversed, I am sure it is a typo. Here is the zip file that has the diagram:

http://www.ps2-scene.org/forums/attachment...tachmentid=3597

Kotosuke · « **Reply #6 on:** July 07, 2004, 11:07:08 pm »

Thank your information for me.
I will try do it.
My PS2 is SCPH-50007(NTSC-J) model.

Hope my poor english can help me. :blink:

Author Topic: PS2 A/V out to stand VGA adapter (Read 1999 times)

Kotosuke

Guest

Guest

Kotosuke