I have seen the pics to modify the X-RGB-2+ but I�m not very good soldering things and I�m afraid if I try to make the mod in the XRGB-2+ I�m going to broke it, so I prefer a converter to use my Scart RGB cables (which would be easier to build too!), the question is, I�m having some problems (I�m a novice sorry...
I have been checking the pins in the Scart cable to localize every pin... and I have got these schematics:
(name)(Euro Scart pin)(JPN RGB pin)
-Red Shield 13->13 (necesary?)
-Green Shield: 9->17 (necesary?)
-Blue Shield: 5->18 (necesary?)
-Sync: ?->9 (maybe pin 17?)
-Sync Shield: ?->7 (maybe pin 20?)
-Audio Left: 6->5
-Audio Left Shield: 4->3
-Audio Right: 2->1
-Audio Right Shield: 4->3
My first question is:
which are the Euro Scart pin numbers of these (those with the ?)?:
My first question is, do I need to solder all of this pins to make an universal adapter?, I have been checking all my RGB Scart cables but none of those (DC, PSX,Ps2, XBOX,NGC and SS) use the shield pins (13,9,5,4)... ok, there is an exception: the SS Scart cable use the pin 4 (Audio shield right + left) but this is the only one with this feature... Which are the necessary pins to use every console with the XRGB-2+?
Thanks in advanced