Has anyone ever tapped the RGB from a Famicom Titler?

[panzeroceania]

Has anyone ever tapped the RGB lines inside of a Famicom Titler who could give me careful, specific, step by step instructions?

This is very rare, old, expensive hardware so I don't want to screw it up. Also if there are other things I can practice on that would be great.

At least the correct PPU is already in the system by default so tapping the lines should be a lot simpler. I can take pictures, just looking for help if anyone is interested in seeing the inside of a Famicom Titler.

[ApolloBoy]

Chris Covell did it with his: http://www.chrismcovell.com/gotRGB/fctitler.html

It looks like you just wire up the RGB lines from the points shown and then connect them to 75 ohm resistors for the final output.

[Moosmann]

Chris use my diagram and stolen two pictures But I allow them when he  send the Rockman Proto ROM, hehe...