I hope someone can help me out with this:
I have a Wells Gardner K7200 arcade monitor that I've been using with my jamma setup with no problems. Now I want to build an adapter to plug my consoles into the thing via SCART. So I bought a scart splitter off ebay, lopped off the male end, and soldered the appropriate wires to the appropriate pins for my monitor pinout.
And it doesn't work.
The R, G, and B are coming through but the sync's not. Tried it with PSX, DC, and Saturn with the same result. Here is how I've got it wired up:
Scart -> K7200
Red Out -> Red
Green Out -> Green
Blue Out-> Blue
Gnd -> Gnd
C-Sync Out -> - H-Sync
I must be forgetting something. What else do I need to hook up to make this thing work? Do I need to connect the SCART rgb returns or the c-sync return to something?
This is my monitor's input connector:
5 + V-Sync
6 + H-Sync
9 - V-Sync
10 - H-Sync
Thanks in advance for any help or ideas!