Author Topic: Crystal Clear Audio Mod for Sega Mega Drive 2 & Genesis 2, version 1.0 (Read 31057 times)

Tiido Priimägi · « **on:** June 23, 2009, 07:38:27 am »

So finally, the mod reached version 1.0 state.

It does all what previous versions did, but at much louder volume and long cables will not have negative effect on high freqs anymore

Output is about as loud as MCD RCA outs, and I'm more than sure its sufficient enough

Only drawback is added complexity, you have many more components now (about 50 or so).

Anyway, if anyone feels like doing one, and runs into issues, be sure to contact me

Lawrence · « **Reply #1 on:** June 23, 2009, 11:46:03 am »

I've re-worked Tiido's fantastic little diagram into a proper schematic:

You can also download the schematic file for use with BSch3V Schematic creator:

Schematic File

Tiido Priimägi · « **Reply #2 on:** June 23, 2009, 10:12:11 pm »

you have couple of capacitors wrong, the ones on opamp inputs are 0.022µF not 22µF, and 3 capacitors are not marked as elecrolythics (2 on output lines, 1 on Vref signal)

EDIT: and the 2 caps on power input are having their labels switched around, 100µF for elecrolythic and 0.1µF for the other cap.

Lawrence · « **Reply #3 on:** June 24, 2009, 03:48:55 pm »

Thanks for that. Updated both the image and the source file with corrected values.

Did I miss anything else? =D

Tiido Priimägi · « **Reply #4 on:** June 25, 2009, 02:24:14 am »

I can see some interection points that are missing like where the power input is, and I see ground touching the line that is supposed to be VCC, that can be quite confusing

antron · « **Reply #5 on:** June 25, 2009, 08:07:51 am »

Is the standard audio out from a G/MD 2 pre-amplified?

Lawrence · « **Reply #6 on:** June 25, 2009, 10:23:10 am »

Quote from: Tiido Priimägi on June 25, 2009, 02:24:14 am

I can see some interection points that are missing like where the power input is, and I see ground touching the line that is supposed to be VCC, that can be quite confusing

Image and schem file updated.

I fixed the two joins on power, but I don't see the ground touching VCC. Can you clarify where that is?

albino_vulpix · « **Reply #7 on:** June 25, 2009, 10:45:50 am »

Quote from: Lawrence on June 25, 2009, 10:23:10 am

Quote from: Tiido Priimägi on June 25, 2009, 02:24:14 am
I can see some interection points that are missing like where the power input is, and I see ground touching the line that is supposed to be VCC, that can be quite confusing

Image and schem file updated.

I fixed the two joins on power, but I don't see the ground touching VCC. Can you clarify where that is?

Directly under the "All transistors are 2SC945" box.

Lawrence · « **Reply #8 on:** June 25, 2009, 10:53:20 am »

Oops. Fixed!

Tiido Priimägi · « **Reply #9 on:** June 25, 2009, 07:58:01 pm »

Quote from: antron on June 25, 2009, 08:07:51 am

Is the standard audio out from a G/MD 2 pre-amplified?

it is preamplified in all MDs, and done poorly, particulary in MD2s, where sound is very filtered and distorted... this mod will make things unfiltered and undistorted, like Kega Fusion for example.

viletim · « **Reply #10 on:** June 29, 2009, 09:58:23 am »

Tiido,

Op-amps are good for reducing the component count.

Tiido Priimägi · « **Reply #11 on:** June 29, 2009, 09:04:32 pm »

I would need a quad opamp for PSG and FM + a dual opamp for output part.... you will need some buffering on YM2612 outputs since they're rather high impedance and really quiet anyway, and if there's anything wrong you get massive distortion :/
Using additional opamp will result in more components really.....

viletim · « **Reply #12 on:** July 01, 2009, 12:52:26 am »

Quote from: Tiido Priimägi on June 29, 2009, 09:04:32 pm

I would need a quad opamp for PSG and FM + a dual opamp for output part.... you will need some buffering on YM2612 outputs since they're rather high impedance and really quiet anyway, and if there's anything wrong you get massive distortion :/
Using additional opamp will result in more components really.....

Yeah, you'd need to get various signals at more or less the same impedance. Is there any DC bias on the PSG/FM signals? If there was you could get away with just a quad op-amp wired as voltage followers.

Also, what are you doing for a power supply to the op-amp? The '4558 isn't going to work very well with the Megadrive's single +5v rail.

Tiido Priimägi · « **Reply #13 on:** July 01, 2009, 02:40:04 am »

FM is on 2.5V at least, but PSG is at 1V, and FM is like 20db more quiet than other signal sources.
The supply is single rail, and I know I'm underpowering the 4558, but I have no other/better chips at hand, and these 4558 work perfectly. I could use additional voltage regulator for say 7...8V supply, but that would make some biasing things more complex... using dual supply can make things nicer though, but I think the components you will use to get dual supply out of single supply will null the savings from other areas...

Anyway, here's a recording :

http://www.fileden.com/files/2008/4/21/1876835/MegaTurrican.ogg

don't tell me it does not sound good

viletim · « **Reply #14 on:** July 01, 2009, 11:29:06 pm »

Tiido,

Do you think it will work as well if I built it from parts in my own stock? Looking at a NE4558 datasheet, I doubt it.

There are lots of audio grade op-amps out there that will work just fine at 5v.

Tiido Priimägi · « **Reply #15 on:** July 02, 2009, 02:08:21 am »

only 4558D is quaranteed to work, I do not care if other opamps will work withuot distortions etc. I have no access to anything unless I put some money into it, and I'm short on it right now....

Tiido Priimägi · « **Reply #16 on:** July 03, 2009, 06:57:21 am »

how it looks like in my MD2 :

l_oliveira · « **Reply #17 on:** July 04, 2009, 02:59:10 am »

Honestly ?

That looks like those chassis mounted old tube radios !!!!
Pretty neat, dude

Tiido Priimägi · « **Reply #18 on:** July 10, 2009, 03:02:11 am »

And comparsions

MD2 CCAM 1.0 -> http://www.fileden.com/files/2008/4/21/1876835/TF4.ogg
MD2 stock -> http://www.fileden.com/files/2008/4/21/1876835/TF4_MD2.ogg
no TMSS MD1 (HiDef) -> http://www.fileden.com/files/2008/4/21/1876835/TF4_MD1.ogg

Richter X · « **Reply #19 on:** July 12, 2009, 08:25:54 am »

Still sounds amazing. Now if only emulators and VGM players would sound this crystal clear.

Ashen · « **Reply #20 on:** July 26, 2009, 07:55:49 pm »

Oh... How it's hard to live without schemotechnic's knowledge... There actually no need to build such schematic. Just replace some capacitor's in op-amp section and it will have another frequency cut edge. Basic schematic cut out anything higher than 8-8.5 kHz. ^_^ If i find time i'll take some fotos of mine board with such audio mod.

Tiido Priimägi · « **Reply #21 on:** July 28, 2009, 06:50:34 pm »

the stock setup also distorts audio quite a lot even when its cutting most of the audible freq range.... lifting the filtering cutoff won't get rid of that, but it will make things cleaner sounding.

panzeroceania · « **Reply #22 on:** September 03, 2009, 01:01:20 pm »

would you then say that this Model 2 Mod if done right gives the best sound from any version of Mega Drive/ Genesis modded or unmodded? If so this is helpful because the model 2 is the easiest to come buy and certainly cheaper than laseractive or wondermega.

Tiido Priimägi · « **Reply #23 on:** September 06, 2009, 06:47:15 am »

Yep, it does give best sound than any unmodded version. All systems with 5487, 5600, 5608 and 5700 ASICs can have this mod (that includes Wondermega, Xeye, Nomad, CDX to name a few).

Ace · « **Reply #24 on:** September 29, 2009, 02:26:06 am »

Forget just the Model 2; there's a particular model of the Genesis Model 1(VA7 motherboard only) that uses the same circuitry as a Genesis Model 2, complete with the same incredibly awful sound circuit. I've built the prototype version of Tiido's circuit when I first found it on Sega-16, and while it is possible to get sound out of the Mono audio outputs via the RF modulator and Multi-A/V out, that old circuit was too weak to get a properly amplified sound output on the headphone jack.

That reminds me: Tiido, I have yet to pick up another VA7 Genesis Model 1. They're still common as hell, but I haven't been looking around flea markets and the like around my area as much as I normally do, but I should be able to go looking for a VA7 Genesis Model 1 on Friday. But even if I pick it up, there's a good chance I'll only be able to ship it in December.

In the meantime, I'll check to see if the new circuit, once I've built one, amplifies the sound enough to be heard well via the VA7 Model 1's headphone jack.

Tiido Priimägi · « **Reply #25 on:** September 29, 2009, 06:46:02 pm »

you will need an additional amp if you want as loud sound as you would get from a real MD1. The output should be around as loud as MCD RCA out.

Ace · « **Reply #26 on:** October 01, 2009, 09:00:24 am »

I assume, then, that without the extra amplifier, I would still be able to hear something? It won't be as faint as the prototype circuit(too quiet to hear anything)?

Tiido Priimägi · « **Reply #27 on:** October 01, 2009, 05:51:42 pm »

its little less loud than NDSlite.... too quiet for my taste but muuuuch more than the previous version.

Segasonicfan · « **Reply #28 on:** December 04, 2009, 10:20:09 pm »

Quote from: Tiido Priimägi on September 06, 2009, 06:47:15 am

Yep, it does give best sound than any unmodded version. All systems with 5487, 5600, 5608 and 5700 ASICs can have this mod (that includes Wondermega, Xeye, Nomad, CDX to name a few).

Are there any CDXs out there with those ASICs? Mine have 315-5660s...

Ace · « **Reply #29 on:** December 05, 2009, 03:57:17 pm »

There's really no point in adding Tiido's circuit to a Sega CDX, as its sound is already quite clear out of the box. It's just a little quieter than most of the other Genesis systems.

Segasonicfan · « **Reply #30 on:** December 06, 2009, 09:05:54 am »

Quote from: Ace on December 05, 2009, 03:57:17 pm

There's really no point in adding Tiido's circuit to a Sega CDX, as its sound is already quite clear out of the box. It's just a little quieter than most of the other Genesis systems.

Really? I dunno about that, it sounds pretty crappy to me. There is a lot of distortion and nosie, partly due to the opamps it uses I'm sure but it definitely doesn't sound half as clear as the sample download songs from the mod. Anyone else have a similar experience with their CDX?

I found the audio DAC though, it's a LC78835. I can't make out what kind of opamp it is since the only marking is "4510" and my searches found nothing to match that. Fortunately it is a standard dual opamp pinout so I was able to replace it just now with a better one (OPA2376). Sound quality improved nicely but I'd still like Tiido's mod quality. I'm thinking about running the opamp on a dual supply as well to improve the quality and maybe replace some of the caps (the audio actually runs through some electrolytic caps which I don't think are the best for audio).

-Segasonicfan

Tiido Priimägi · « **Reply #31 on:** December 07, 2009, 12:09:31 pm »

I have a MultiMega around, and it does sound very nice, at least MD side... there is considerable amount of digital noise and video noise in the sound, particularly because of the compactness. You can fix this by adding a linear power regulator and use it to power all audio parts and nothing else. This is what I did in my MD2 and things became really nice when it comes to noises in sound.
I need to do more research around CDX / MultiMega, its compactness makes things quite challenging though. to get good sound, you will have to kick out the 315-5684, there's nothing you can do about it... I believe its some octal opamp by ROHM.

Segasonicfan · « **Reply #32 on:** December 08, 2009, 03:38:16 pm »

Quote from: Tiido Priimägi on December 07, 2009, 12:09:31 pm

I have a MultiMega around, and it does sound very nice, at least MD side... there is considerable amount of digital noise and video noise in the sound, particularly because of the compactness. You can fix this by adding a linear power regulator and use it to power all audio parts and nothing else. This is what I did in my MD2 and things became really nice when it comes to noises in sound.
I need to do more research around CDX / MultiMega, its compactness makes things quite challenging though. to get good sound, you will have to kick out the 315-5684, there's nothing you can do about it... I believe its some octal opamp by ROHM.

This is good information. It's that digital and video noise that I can't stand despite the sound quality and so that's what I am trying to fix. I already added a linear power supply to the video circuit separately but there was still a *lot* of video noise. It wasn't until I used a linear 5v instead of the main supply that that really improved...and that was after I installed new caps for the old power supply.

I think your suggestion of using linear regulation for just the audio parts is a great idea...the only problem with that now is I will be cramming 4(!) 7805s in there which will produce some considerable extra heat.

I don't mind kicking out the 315-5684 as my soldering skills are very good. Do you know the pinout for it? If it is just an opamp I would to replace it but I can't tell what it is at all. I did trace the audio lines to the lower CD PCB and to that DAC and subsequent opamp I mentioned. if you think it would help I would be glad to post pictures on my findings.

Let's make the CDX/multimega the best tiny Genesis/MD is out there!

-Segasonicfan

Tiido Priimägi · « **Reply #33 on:** December 08, 2009, 08:24:43 pm »

its better for you to use the existing switcher for video and all else and single 7805 for just audio... it will be nice challenge to sseparate all audio related parts' power supplies

I gave my MD2 a LM2676 for digital and video stuff and used the existing 7085 for all sound things. I can give you pins of the sound power lines on the Sega ASIC. Main reason I use another 5V supply in my MD2 is that I was overloading the poor 7805 quite a bit with the mods I have added... This is what I've done to my MD2 :
http://www.fileden.com/files/2008/4/21/1876835/MD2front.jpg

http://www.fileden.com/files/2008/4/21/1876835/MixerChipSchematic.jpg
Here's a schematic of the mixer chip in MD2 VA3, it seems to be same in MD2 VA4 also. Nomad has thigns a bit different, I've yet to work out a schematic. 32X uses same chip too and things aren't really different, except there's unused input pins (which should be tied somewhere to reduce noise...).

Any info and images are helpful. Schematics tell more than 1000 words

Segasonicfan · « **Reply #34 on:** December 09, 2009, 03:58:05 am »

Thanks for that schematic Tiido!

The reason I used a separate 7805 instead of the switcher was because of the massive video noise my CDX had. Apparently they revised the DC-DC in some later CDX's/MultiMegas to make this a little bit better. but I couldn't stand the video, there were diagonal noise lines rolling up and down the screen periodically and especially on certain colors. It wasn't until I cut the main +5v and used 2 7805s (to get enough current) instead that this went away:

http://i18.photobucket.com/albums/b134/Segasonicfan/cdxaudiomod4.jpg
(picture of where I cut and added the new power supply)
http://i18.photobucket.com/albums/b134/Segasonicfan/audiomod2.jpg
(pic of the new 7805s- that copper is very convenient

It shouldn't be too hard to separate the audio parts' power supplies as long as I know what all of them are. Your schem should be enough because I found the parts on the sub board:
http://i18.photobucket.com/albums/b134/Segasonicfan/CDXaudiomod.jpg

That's the opamp I replaced and the DAC. The hand soldered sub board that is a fix Sega installed with every CDX unit I've seen is also something working with the audio and should have its +5v from the 7805 as well (I believe they made it easy by using red wire even).

So the parts to separate power are:
LC78835
'4510' opamp (or replaced better opamp)
315-5684

The LM2676 looks great for a 7805 replacement. Won't generate as much heat either. Though fitting inside a CDX might be hard and ideally it would be nice to find a newer chip out there designed specifically for low noise apps with high PSRR and all that. I'll look around.

It looks like that schem has all the info needed to replace the 315-5684 with the better mixer circuits from this thread, correct?
Glad this project is finally going through, looking forward to hearing your findings.

-Segasonicfan

Tiido Priimägi · « **Reply #35 on:** December 09, 2009, 02:00:58 pm »

There should be 2x DACs there, LC7883 that is for CDDA(at least in MegaCD2, seems CDX uses something else) and LC78835 that is for PCM chip.

Regarding LM2676, it did gave me some rolling lines in video, but that got fixed by adding a 100µF cap on the video encoder power pins. I would replace all of the original switcher circuit with some of the modern switchers, they're certainly much more efficient (the LM2676 does not even get warm in my MD2, its the 7805 the heatsink is for, hehehehehehe). I plan on giving my nomad a LM2676, it sohlud give a lovely extra hour of battery life (I want 10 hours, and i'm not too far from getting it).

You can just put my circuit on top of the 315-5684, the volume levels of all signals are right so no adjustments need to be made, just desolder the chip, get rid of some extra components and those series and parallel capacitors everywhere on the audio lines and you're done. You might replace the 4558D with something else, but it needs to have at least 3MHz of bandwidth (I'm not doing too much filtering, and YM output can carry freqs up to few hundred KHz !!!)
I just remembered that there is headphone output on the CDX though, I will look into it first... but I have school coming tomorrow so I cannot do any work on this subject until Saturday.

Segasonicfan · « **Reply #36 on:** December 13, 2009, 07:22:32 pm »

Egh...having trouble finding the other DACs..
I got the rolling lines on video from the default setup but I'll try that extra bypassing.

Tracing the 31-55684 is proving extremely difficult...I can't even find the placement of the components to remove (since it is a 4-ply PCB after all...) are you having any better luck with this?
What is the 4558d? Is that the opamp that I could not identify? That was located by the headphone out which is what I've been working with (or rather, the line out which looks to be wired up pretty much the same minus the pot).

I'd love a picture of your ultra modded MD2 with a description of what you've done. It's looks like you've tried a lot of new things and it is very interesting.

-Segasonicfan

Tiido Priimägi · « **Reply #37 on:** December 15, 2009, 11:23:32 pm »

4558D is the opamp I use in my sound mod

I have not messed with the setup yet, i've got some other commission things to work out first.

Regarding my MD2, I'll make a shot with comments sometime in nearer future. There's quite a lot of stuff done, some of which is never done before, at least not that way.

Segasonicfan · « **Reply #38 on:** December 22, 2009, 07:04:19 am »

looking forward to your MD2 desc. and working on this project more when you get the time. Until then I'm going to experiment with what we've been talking about i.e. bypassing what audio circuits I can find and putting in better power regulation. In the future I would love to tackle the 315-5684 mod with your help.
best,
-Segasonicfan

Tiido Priimägi · « **Reply #39 on:** December 22, 2009, 08:50:24 am »

MD2 shot with comments - http://www.fileden.com/files/2008/4/21/1876835/MyMD2frontShotComments.jpg

And I got a small accident yesterday so I'm a bit immobilized... http://www.fileden.com/files/2008/4/21/1876835/Immobilized.jpg