I'm new to this board. I bought a Sharp X68000 Expert a while ago. Unfortunately the psu was broken. I bought an old ATX psu and replaced it. The Sharp is working now. Unfortunately the system randomly shuts down. I'm not sure why. Probably the psu has too less power?
This is the datasheet of my psu:
100-127V / 4A
200-240V / 2A (currently runs on 230V)
+5V / 15A
+3.3V / 10A
+5VSB / 2A
+12V / 2A
-12V / 0.2A
+5V & 3.3V shall not exceed 90 W
Is that enough power for an Sharp X68k Expert?