NGC PAL RGB cable to RGB(HV) bnc's

[gori]

hi !

i wanted to know if it is possible in your opinion
to make a cable from a original RGB gamecube pal scart cable  but to "cut" the scart part for a  RGB(hV) bnc cable.

I am thinking of connecting all my RGB able machines to an RGBHV bnc 10 input switcher from extron to a single RGB scart output

i didn't find the schematic for the NGC RGB cable, somebody has one ?

thanks !

Eric

[matt]

The Gamecube pinout is the same as the SNES.

To make it easy, you could always just make a cable with a female Scart plug on one end, and BNCs on the other.

[gori]

thanks for the info !
i was told that the snes rgb cable (and i tried) didn't work on the gamecube
but the pin emplacement are the "same" ?

i won't use a female scart as i want to use better cables all the way  

thanks for the help

Eric

[matt]

The Gamecube scart cable has some capacitors in it that don't work with the PAL SNES, but the pinout is the same.

[NFG]

Note that only the PAL GameCube has RGB output, the NTSC ones do NOT.  They must use the digital port and a converted Component cable for RGB output.

[gori]

right for the pal exclusive rgb (but no y/c i think ?)

so, all i have to do (with my pal gamecube) and a rgb cable
is to cut the cable after the ngc "plug" side (in order to keep the capacitors), solder my better bnc cables and that's it ?

i'll give a try and keep you informed

thanks !

and merry xmas

Eric